Commercial Concrete Repair in Bettendorf, IA
Challenge
The owner of a commercial property in Bettendorf, Iowa, faced a safety concern at the main entrance of a shared business space. The concrete slabs had settled over time, creating an uneven surface and a noticeable tripping hazard for tenants and customers. This issue not only posed a liability risk but also negatively impacted the building's professional appearance. The property owner needed a quick and effective solution that would restore safety without the high cost and disruption of full concrete replacement.
Solution
To resolve the problem, a two step approach was used to lift, level, and seal the concrete.
- Concrete Lifting with PolyLevel: The settled concrete was lifted and leveled using PolyLevel, a high-density polyurethane foam. This process involved drilling a few small, pea-sized holes in the affected concrete slab. The liquid foam was then injected through these holes where it expanded to fill the underlying voids and gently raise the slab back to its correct height. This non-invasive method provided a fast and precise lift, with the foam curing in as little as 15 minutes.
- Crack and Joint Sealing with NexusPro: After the concrete was leveled, the existing cracks and joints were sealed with NexusPro. This high-performance, silicone-based sealant is specifically designed to resist UV rays and extreme temperatures. By sealing the concrete, the solution prevented water from seeping into the sub-base, which is a common cause of future concrete settlement.
By the end of the day, the concrete at this Bettendorf business entrance was successfully lifted and leveled, completely eliminating the tripping hazard and restoring a uniform, professional look. The combination of PolyLevel for lifting and NexusPro for sealing provided a durable, long-term repair. The property owner was able to achieve a safer and more attractive entrance for his business space with minimal disruption and a cost-effective alternative to concrete replacement.
